CO2-W-D-2.5
Art. no. 100092
CO2 and temp. transducer without LCD display
For indoor installation. Measuring range CO2: 0 –
3,000 ppm, (factory calibrated to 0 – 2,000 ppm).
Measuring range, temperature: 0 – 50 °C. For
demand-based control of ventilation systems. The
measuring principle is based on non-dispersive
infrared technology with automatic
self-calibration. 5 year service intervals. 2
linear analog outputs OUT1 (CO2) and OUT2
(temperature) adjustable between 0 – 10 V DC and
4 – 20 mA using jumpers. Additional jumper for
offsetting the 0-point to +20%. Power supply: 24
V AC/DC ± 20% Housing for interior vertical wall
mounting. Housing: 97 x 61 x 19 mm (H x W x D),
white. Protection class: IP 30.
Data sheet no. 14101
For indoor installation. Measuring range CO2: 0 –
3,000 ppm, (factory calibrated to 0 – 2,000 ppm).
Measuring range, temperature: 0 – 50 °C. For
demand-based control of ventilation systems. The
measuring principle is based on non-dispersive
infrared technology with automatic
self-calibration. 5 year service intervals. 2
linear analog outputs OUT1 (CO2) and OUT2
(temperature) adjustable between 0 – 10 V DC and
4 – 20 mA using jumpers. Additional jumper for
offsetting the 0-point to +20%. Power supply: 24
V AC/DC ± 20% Housing for interior vertical wall
mounting. Housing: 97 x 61 x 19 mm (H x W x D),
white. Protection class: IP 30.
Data sheet no. 14101
Unit price
€603.60
Discountgroup: ARG01
CO2 and temp. transducer without LCD display
For indoor installation. Measuring range CO2: 0 –
3,000 ppm, (factory calibrated to 0 – 2,000 ppm).
Measuring range, temperature: 0 – 50 °C. For
demand-based control of ventilation systems. The
measuring principle is based on non-dispersive
infrared technology with automatic
self-calibration. 5 year service intervals. 2
linear analog outputs OUT1 (CO2) and OUT2
(temperature) adjustable between 0 – 10 V DC and
4 – 20 mA using jumpers. Additional jumper for
offsetting the 0-point to +20%. Power supply: 24
V AC/DC ± 20% Housing for interior vertical wall
mounting. Housing: 97 x 61 x 19 mm (H x W x D),
white. Protection class: IP 30.
Data sheet no. 14101
For indoor installation. Measuring range CO2: 0 –
3,000 ppm, (factory calibrated to 0 – 2,000 ppm).
Measuring range, temperature: 0 – 50 °C. For
demand-based control of ventilation systems. The
measuring principle is based on non-dispersive
infrared technology with automatic
self-calibration. 5 year service intervals. 2
linear analog outputs OUT1 (CO2) and OUT2
(temperature) adjustable between 0 – 10 V DC and
4 – 20 mA using jumpers. Additional jumper for
offsetting the 0-point to +20%. Power supply: 24
V AC/DC ± 20% Housing for interior vertical wall
mounting. Housing: 97 x 61 x 19 mm (H x W x D),
white. Protection class: IP 30.
Data sheet no. 14101
| Measured medium 1: |
Air |
|---|---|
| Measuring range 1: |
0...2000 ppm |
| Outputs 1: |
Measurement signal 0... 10 V / 4...20 mA (switchable) |
| Outputs 2: |
Measurement signal 0... 10 V / 4...20 mA (switchable) |
| Permissible temperature of medium 1: |
0…+50 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP30 |
| Sensor element 1: |
NDIR sensor |
Datasheet 14101 - CO2 and temperature sensor CO2-W 2.5 / CO2-K
Catalog 2025 (PDF)
Flip catalogue 2025
CO2-W/K Modbus-Protokoll (only German)
Technical data
| Measured medium 1: |
Air |
|---|---|
| Measuring range 1: |
0...2000 ppm |
| Outputs 1: |
Measurement signal 0... 10 V / 4...20 mA (switchable) |
| Outputs 2: |
Measurement signal 0... 10 V / 4...20 mA (switchable) |
| Permissible temperature of medium 1: |
0…+50 °C |
| Power supply 1: |
24 V AC/DC |
| Protection type: |
IP30 |
| Sensor element 1: |
NDIR sensor |
Downloads
Datasheet 14101 - CO2 and temperature sensor CO2-W 2.5 / CO2-K
Catalog 2025 (PDF)
Flip catalogue 2025
CO2-W/K Modbus-Protokoll (only German)
CAB-02
USB cable for OPP-Room for configuring OPP-Room transmitters.
For configuring outputs, controller settings,
display brightness, alarm thresholds (LCD display
color change ), bus settings, etc. Galvanic
isolation included. For use with the OR-C
OPP-Room configuration software (see the download
area of our website).
Data sheet no. 20560
For configuring outputs, controller settings,
display brightness, alarm thresholds (LCD display
color change ), bus settings, etc. Galvanic
isolation included. For use with the OR-C
OPP-Room configuration software (see the download
area of our website).
Data sheet no. 20560
Einblicke zu 40 Jahren Oppermann
Contact us