Water pressure
P-BAC-W16
Water pressure
Pressure transmitter for water Output BACnet
""For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-poin calibration possible via optional display
Permissible ambient conditions: -20 – 70 °C. 0 – 95% rH (non-condensing).
Permissible medium temperature: -20 – 100 °C.
Supply voltage: 15 – 30 V AC/DC.
Power consumption: 205 mA (24 V AC)/70 mA (24 V DC).
Output volume/air flow: 0 – 10 V or 4 – 20 mA, switchable or bus
Output temperature: 0 – 10 V or 4 – 20 mA switchable or bus
Nominal diameter: Stainless steel sleeve ø 10 mm.
Mounting: air duct mounting flange F-10 (included).
Housing: IP 65 including seal ring, base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Strain relief: M16
Cable connection: spring terminals 0.2 – 1.5 mm².
Data sheet no. 11401"
""For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-poin calibration possible via optional display
Permissible ambient conditions: -20 – 70 °C. 0 – 95% rH (non-condensing).
Permissible medium temperature: -20 – 100 °C.
Supply voltage: 15 – 30 V AC/DC.
Power consumption: 205 mA (24 V AC)/70 mA (24 V DC).
Output volume/air flow: 0 – 10 V or 4 – 20 mA, switchable or bus
Output temperature: 0 – 10 V or 4 – 20 mA switchable or bus
Nominal diameter: Stainless steel sleeve ø 10 mm.
Mounting: air duct mounting flange F-10 (included).
Housing: IP 65 including seal ring, base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Strain relief: M16
Cable connection: spring terminals 0.2 – 1.5 mm².
Data sheet no. 11401"
P-BAC-W16-D-NFC
Water pressure
Pressure transmitter for water, output BACnet, with display and NFC interface
For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration and parameterization (address, baud rate) via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC.
Power consumption: 145 mA (24 V AC)/45 mA (24 V DC).
Temperature range: -25 °C – +85 °C.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Water-side connection: G 1/2 A.
2x strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with double-row spring terminals.
Cable cross-section 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration and parameterization (address, baud rate) via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC.
Power consumption: 145 mA (24 V AC)/45 mA (24 V DC).
Temperature range: -25 °C – +85 °C.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Water-side connection: G 1/2 A.
2x strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with double-row spring terminals.
Cable cross-section 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
P-MOD-W16
Water pressure
Pressure transmitter for water Output Modbus
""For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar and offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-point calibration possible via optional display
""For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar and offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-point calibration possible via optional display
P-MOD-W16-D-NFC
Water pressure
Pressure transmitter for water, output Modbus, with display and NFC interface
For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration and parameterization (address, baud rate) via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC.
Power consumption: 145 mA (24 V AC)/45 mA (24 V DC).
Temperature range: -25 °C – +85 °C.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Water-side connection: G 1/2 A.
2x strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with double-row spring terminals.
Cable cross-section 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes.
For non-corrosive media.
Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration and parameterization (address, baud rate) via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC.
Power consumption: 145 mA (24 V AC)/45 mA (24 V DC).
Temperature range: -25 °C – +85 °C.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Water-side connection: G 1/2 A.
2x strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with double-row spring terminals.
Cable cross-section 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
P-T-W16
Water pressure
Pressure transmitter for water (3-wire), 1 output 0 – 10 V/4 – 20 mA, switchable
""For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25°C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-point calibration possible via optional display
""For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25°C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-point calibration possible via optional display
P-T-W16-D-NFC
Water pressure
Pressure transmitter for water (3-wire) with display and NFC, 1 output 0 – 10 V/4 – 20 mA, switchable
For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2, 0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC.
Power consumption: 100 mA (24 V AC)/30 mA (24 V DC).
Temperature range: -25 – +85 °C. Water-side connection: G 1/2 A.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to 70°C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2, 0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 30 V AC/DC.
Power consumption: 100 mA (24 V AC)/30 mA (24 V DC).
Temperature range: -25 – +85 °C. Water-side connection: G 1/2 A.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to 70°C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
P-TC-W16
Water pressure
Pressure transmitter for water (2-wire), 1 output 4 – 20 mA
""For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2, 0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-point calibration possible via optional display
""For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2, 0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
With captive lid.
8 lid positions selectable.
5-point calibration possible via optional display
P-TC-W16-D-NFC
Water pressure
Pressure transmitter for water (2-wire), 1 output 4 – 20 mA with display and NFC interface
For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2, 0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 35 V DC.
Temperature range: -25 °C – +85 °C.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Water-side connection: G 1/2 A.
Strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes.
For non-corrosive media.
10 measuring ranges: 0 – 2, 0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 – 12, 0 – 14, 0 – 16 bar and 10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar.
With pressure compensation membrane and protected electronics, for long-term use and protection against moisture.
8 lid positions selectable.
5-point calibration via the NFC interface on the display.
Output signal linear due to microprocessor technology.
Power supply: 15 – 35 V DC.
Temperature range: -25 °C – +85 °C.
Housing: Base: PBT, color similar to RAL 7016.
Display: PC, transparent.
Ring: PBT, color similar to RAL 1003.
Water-side connection: G 1/2 A.
Strain relief M16.
Protection class: IP 65, (including seal ring).
Fast wiring with spring terminals 0.2 – 1.5 mm².
Permissible ambient conditions: -20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
PWD-1.0/2.5
Water pressure
Differential pressure transmitter for water with 2 selectable measuring ranges
To measure differential pressure in water pipes
for non-corrosive media. Output: 0 – 10 V/4 – 20
mA, switchable. Measuring ranges: 0 – 1.0/0 – 2.5
bar. Power supply: 24 V AC/DC. Elec. connection:
M12. Temperature range medium: -20 – +100 °C.
Temperature range Surrounding: -20 – +70 °C.
Water side connection: Ermeto screw connection
for 8 mm copper pipe (on-site). Measurement
error: < 2.5% of the measuring range at 25 °C.
Protection class: IP 65.
Data sheet no. 13208
To measure differential pressure in water pipes
for non-corrosive media. Output: 0 – 10 V/4 – 20
mA, switchable. Measuring ranges: 0 – 1.0/0 – 2.5
bar. Power supply: 24 V AC/DC. Elec. connection:
M12. Temperature range medium: -20 – +100 °C.
Temperature range Surrounding: -20 – +70 °C.
Water side connection: Ermeto screw connection
for 8 mm copper pipe (on-site). Measurement
error: < 2.5% of the measuring range at 25 °C.
Protection class: IP 65.
Data sheet no. 13208