Water pressure
P-BAC-W16
Water pressure
Pressure transmitter for water Output BACnet
""For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. With
captive lid. 8 lid positions selectable. 5-point
calibration possible via optional display Permissible ambient conditions: -20 –
70 °C. 0 – 95% rH (non-condensing). Permissible
medium temperature: -20 – 100 °C. Supply voltage:
15 – 30 V AC/DC. Power consumption: 205 mA (24 V
AC)/70 mA (24 V DC). Output volume/air flow: 0 –
10 V or 4 – 20 mA, switchable or bus Output
temperature: 0 – 10 V or 4 – 20 mA switchable or
bus Nominal diameter: Stainless steel sleeve ø 10
mm. Mounting: air duct mounting flange F-10
(included). Housing: IP 65 including seal ring,
base: PBT, color similar to RAL 7016. Display:
PC, transparent. Ring: PBT, color similar to RAL
1003. Strain relief: M16 Cable connection: spring
terminals 0.2 – 1.5 mm².
Data sheet no. 11401"
""For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. With
captive lid. 8 lid positions selectable. 5-point
calibration possible via optional display Permissible ambient conditions: -20 –
70 °C. 0 – 95% rH (non-condensing). Permissible
medium temperature: -20 – 100 °C. Supply voltage:
15 – 30 V AC/DC. Power consumption: 205 mA (24 V
AC)/70 mA (24 V DC). Output volume/air flow: 0 –
10 V or 4 – 20 mA, switchable or bus Output
temperature: 0 – 10 V or 4 – 20 mA switchable or
bus Nominal diameter: Stainless steel sleeve ø 10
mm. Mounting: air duct mounting flange F-10
(included). Housing: IP 65 including seal ring,
base: PBT, color similar to RAL 7016. Display:
PC, transparent. Ring: PBT, color similar to RAL
1003. Strain relief: M16 Cable connection: spring
terminals 0.2 – 1.5 mm².
Data sheet no. 11401"
P-BAC-W16-D-NFC
Water pressure
Pressure transmitter for water, output BACnet, with display and NFC interface
For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. 8 lid
positions selectable. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. Output signal linear
due to microprocessor technology. Power supply:
15 – 30 V AC/DC. Power consumption: 145 mA (24 V
AC)/45 mA (24 V DC). Temperature range: -25 °C –
+85 °C. Housing: Base: PBT, color similar to RAL
7016. Display: PC, transparent. Ring: PBT, color
similar to RAL 1003. Water-side connection: G 1/2
A. 2x strain relief M16. Protection class: IP 65,
(including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. 8 lid
positions selectable. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. Output signal linear
due to microprocessor technology. Power supply:
15 – 30 V AC/DC. Power consumption: 145 mA (24 V
AC)/45 mA (24 V DC). Temperature range: -25 °C –
+85 °C. Housing: Base: PBT, color similar to RAL
7016. Display: PC, transparent. Ring: PBT, color
similar to RAL 1003. Water-side connection: G 1/2
A. 2x strain relief M16. Protection class: IP 65,
(including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
P-MOD-W16
Water pressure
Pressure transmitter for water Output Modbus
""For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar
and offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. With
captive lid. 8 lid positions selectable. 5-point
calibration possible via optional display
""For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar
and offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. With
captive lid. 8 lid positions selectable. 5-point
calibration possible via optional display
P-MOD-W16-D-NFC
Water pressure
Pressure transmitter for water, output Modbus, with display and NFC interface
For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. 8 lid
positions selectable. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. Output signal linear
due to microprocessor technology. Power supply:
15 – 30 V AC/DC. Power consumption: 145 mA (24 V
AC)/45 mA (24 V DC). Temperature range: -25 °C –
+85 °C. Housing: Base: PBT, color similar to RAL
7016. Display: PC, transparent. Ring: PBT, color
similar to RAL 1003. Water-side connection: G 1/2
A. 2x strain relief M16. Protection class: IP 65,
(including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes. For
non-corrosive media. Measuring range: 0 – 16 bar.
10x offset adjustable via rotary switch.
Tolerance: +/-0.1 bar at +25 °C and 8 bar. 8 lid
positions selectable. 5-point calibration and
parameterization (address, baud rate) via the NFC
interface on the display. Output signal linear
due to microprocessor technology. Power supply:
15 – 30 V AC/DC. Power consumption: 145 mA (24 V
AC)/45 mA (24 V DC). Temperature range: -25 °C –
+85 °C. Housing: Base: PBT, color similar to RAL
7016. Display: PC, transparent. Ring: PBT, color
similar to RAL 1003. Water-side connection: G 1/2
A. 2x strain relief M16. Protection class: IP 65,
(including seal ring). Fast wiring with
double-row spring terminals. Cable cross-section
0.2 – 1.5 mm². Permissible ambient conditions:
-20 °C to +70 °C. 0 – 95% rH (non-condensing).
Leakage resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
P-T-W16
Water pressure
Pressure transmitter for water (3-wire), 1 output 0 – 10 V/4 – 20 mA, switchable
""For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. With captive lid. 8 lid positions
selectable. 5-point calibration possible via
optional display
""For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. With captive lid. 8 lid positions
selectable. 5-point calibration possible via
optional display
P-T-W16-D-NFC
Water pressure
Pressure transmitter for water (3-wire) with display and NFC, 1 output 0 – 10 V/4 – 20 mA, switchable
For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. 8 lid positions selectable. 5-point
calibration via the NFC interface on the display.
Output signal linear due to microprocessor
technology. Power supply: 15 – 30 V AC/DC. Power
consumption: 100 mA (24 V AC)/30 mA (24 V DC).
Temperature range: -25 – +85 °C. Water-side
connection: G 1/2 A. Housing: Base: PBT, color
similar to RAL 7016. Display: PC, transparent.
Ring: PBT, color similar to RAL 1003. Strain
relief M16. Protection class: IP 65, (including
seal ring). Fast wiring with spring terminals 0.2
– 1.5 mm². Permissible ambient conditions: -20 °C
to 70°C. 0 – 95% rH (non-condensing). Leakage
resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. 8 lid positions selectable. 5-point
calibration via the NFC interface on the display.
Output signal linear due to microprocessor
technology. Power supply: 15 – 30 V AC/DC. Power
consumption: 100 mA (24 V AC)/30 mA (24 V DC).
Temperature range: -25 – +85 °C. Water-side
connection: G 1/2 A. Housing: Base: PBT, color
similar to RAL 7016. Display: PC, transparent.
Ring: PBT, color similar to RAL 1003. Strain
relief M16. Protection class: IP 65, (including
seal ring). Fast wiring with spring terminals 0.2
– 1.5 mm². Permissible ambient conditions: -20 °C
to 70°C. 0 – 95% rH (non-condensing). Leakage
resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
P-TC-W16
Water pressure
Pressure transmitter for water (2-wire), 1 output 4 – 20 mA
""For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. With captive lid. 8 lid positions
selectable. 5-point calibration possible via
optional display
""For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. With captive lid. 8 lid positions
selectable. 5-point calibration possible via
optional display
P-TC-W16-D-NFC
Water pressure
Pressure transmitter for water (2-wire), 1 output 4 – 20 mA with display and NFC interface
For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. 8 lid positions selectable. 5-point
calibration via the NFC interface on the display.
Output signal linear due to microprocessor
technology. Power supply: 15 – 35 V DC.
Temperature range: -25 °C – +85 °C. Housing:
Base: PBT, color similar to RAL 7016. Display:
PC, transparent. Ring: PBT, color similar to RAL
1003. Water-side connection: G 1/2 A. Strain
relief M16. Protection class: IP 65, (including
seal ring). Fast wiring with spring terminals 0.2
– 1.5 mm². Permissible ambient conditions: -20 °C
to +70 °C. 0 – 95% rH (non-condensing). Leakage
resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
For measuring pressures in containers/pipes. For
non-corrosive media. 10 measuring ranges: 0 – 2,
0 – 2.5, 0 – 4, 0 – 5, 0 – 6, 0 – 8, 0 – 10, 0 –
12, 0 – 14, 0 – 16 bar and 10x offset adjustable
via rotary switch. Tolerance: +/-0.1 bar at +25
°C and 8 bar. 8 lid positions selectable. 5-point
calibration via the NFC interface on the display.
Output signal linear due to microprocessor
technology. Power supply: 15 – 35 V DC.
Temperature range: -25 °C – +85 °C. Housing:
Base: PBT, color similar to RAL 7016. Display:
PC, transparent. Ring: PBT, color similar to RAL
1003. Water-side connection: G 1/2 A. Strain
relief M16. Protection class: IP 65, (including
seal ring). Fast wiring with spring terminals 0.2
– 1.5 mm². Permissible ambient conditions: -20 °C
to +70 °C. 0 – 95% rH (non-condensing). Leakage
resistance: 100 MΩ, 20°C, 500 V DC.
Data sheet no. 13300
PWD-1.0/2.5
Water pressure
Differential pressure transmitter for water with 2 selectable measuring ranges
To measure differential pressure in water pipes
for non-corrosive media. Output: 0 – 10 V/4 – 20
mA, switchable. Measuring ranges: 0 – 1.0/0 – 2.5
bar. Power supply: 24 V AC/DC. Elec. connection:
M12. Temperature range medium: -20 – +100 °C.
Temperature range Surrounding: -20 – +70 °C.
Water side connection: Ermeto screw connection
for 8 mm copper pipe (on-site). Measurement
error: < 2.5% of the measuring range at 25 °C.
Protection class: IP 65.
Data sheet no. 13208
To measure differential pressure in water pipes
for non-corrosive media. Output: 0 – 10 V/4 – 20
mA, switchable. Measuring ranges: 0 – 1.0/0 – 2.5
bar. Power supply: 24 V AC/DC. Elec. connection:
M12. Temperature range medium: -20 – +100 °C.
Temperature range Surrounding: -20 – +70 °C.
Water side connection: Ermeto screw connection
for 8 mm copper pipe (on-site). Measurement
error: < 2.5% of the measuring range at 25 °C.
Protection class: IP 65.
Data sheet no. 13208